C32 ACERT™ WATER-COOLED MANIFOLD ENGINE
Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions. Applications powered by C32 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C32 ACERT water-cooled manifold engines, with ratings: 597-914 bkW (800 1125 bhp) @ 2100 rpm meet IMO Tier II, U.S. EPA Marine Tier 2, and U.S. EPA Non-road Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.
SPECIFICATIONS
Minimum Rating597.0 bkW
Maximum Rating914.0 bkW
AspirationTurbocharged-Aftercooled
general specifications
Minimum Rating597.0 bkW
Maximum Rating914.0 bkW
AspirationTurbocharged-Aftercooled
Displacement32.1 L
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136
Stroke162.0 mm
Bore145.0 mm
emissions
EmissionsEPA and CARB Non-Road Mobile Tier 2, EPA Marine Tier 2, IMO Tier II, China Stage III
dimensions
Length1933.0 mm
Width1488.0 mm
Height1389.0 mm
Weight2306.0 kg
C32 ACERT™ (Water-Cooled Manifold) STANDARD EQUIPMENT
- air inlet system
Connections configured for SCAC and ATAAC (Air-to-AirAftercooled) or remote heat exchanger - control system
ADEM A4 electronic control module
Electronic governing, PTO speed control
Customer programmable ratings
Cold mode start strategy
Automatic altitude compensation
Automatic fuel temperature compensation
Programmable low and high idle
Electronic diagnostics and fault logging
Engine monitoring system
SAE J1939 broadcast (diagnostic and engine status) - cooling system
Gear-driven centrifugal jacket water pump — RH
Integrated thermostat and housing
Engine oil cooler
Optional installed transmission oil cooler
Optional aftercooler and auxiliary water pump
Optional jacket water heat exchanger - exhaust system
Exhaust manifold — watercooled - fuel system
MEUI
Fuel priming pump
Fuel transfer pump
Primary and secondary fuel filter — RH configured for remote mounting (installed RH on shipping plate) - flywheels and flywheel housing
SAE No. 0 or SAE No. 1 flywheel iron housing
SAE No. 0 or SAE No. 1 flywheel
Optional transmission adapter - lube system
Crankcase breather
Oil filter — RH standard, optional LH or remote mount service
Oil level gauge — RH standard, optional LH or dual service
Oil filler — RH standard, optional LH or dual service
Shallow oil pan, rear sump - mounting system
Trunnion front support
Vertical and horizontal pads on rear flywheel housing - protection system
24 volt electronic
Engine overspeed with optional air shut-offs with indicators
Low engine oil pressure
Fuel filter restriction
Fuel temperature
High engine coolant temperature
Low engine coolant temperature - general
Vibration damper
Lifting eyes
Optional customer wiring connector
Service tool connector
Paint — Cat yellow
Optional two-part primer and mastic caulk
C32 ACERT™ (Water-Cooled Manifold) OPTIONS
- air compressors
- air inlet system
Air cleaner
Air inlet adapters
Turbocharger outlet adapters
Air lines - charging system
Battery chargers
Charging alternators
Alternator mounting
Circuit breakers and mountings - cooling system
Dry charge coolant conditioners
Thermostat housing
Coolant level sensor
Radiator
Blower fans
Suction fans
Fan adapters
Fan drives - emissions
IMO certifications - exhaust system
Elbows
Mufflers - fuel systems
Electric fuel priming pump - instrumentation
Customer management device
Interconnect harness
Gauges and instrument panels - lube system
Oil pans
Oil service side
Oil level gauge
Oil filters
Lubricating oils - mounting system
Structural steel base
Engine support — front
Engine support — rear - power takeoffs
Auxiliary drive
Damper pulley
Hydraulics gear pumps - protection system
Mechanical shutoffs
Solenoid shutoffs - starting system
Electric starting motors - 12V, 24V
Battery sets - 24V
Battery cable
Battery rack
Starting aids - transmission arrangement
Transmission water lines
Transmission cooler