C32 ACERT™ DRY MANIFOLD ENGINE
Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C32 ACERT engines include well stimulation pumping, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C32 ACERT Industrial Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent and China Stage III emission standards. They are available using U.S. EPA Flexibility, and for other regulated and non-regulated areas.
SPECIFICATIONS
Minimum Rating596.0 bkW
Maximum Rating1118.0 bkW
Governor and ProtectionADEM A3
general specifications
Minimum Rating596.0 bkW
Maximum Rating1118.0 bkW
Governor and ProtectionADEM A3
AspirationTurbocharged-Aftercooled
Displacement32.1 L
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136
Rotation (from flywheel end)Counterclockwise
Stroke162.0 mm
Bore145.0 mm
emissions
EmissionsEPA and CARB Non-Road Mobile Tier 2, IMO Tier II, China Stage III
dimensions
Length1918.0 mm
Width1473.0 mm
Height1321.0 mm
Weight2286.0 kg
capacity for liquids
Cooling System55.0 L
C32 ACERT™ (Dry Manifold) STANDARD EQUIPMENT
- air inlet system
Quad turbocharger — 3 cylinder exhaust to each turbo
Connections configured for ATAAC (Air-to-Air-Aftercooled) or remote heat exchanger - control system
ADEM A4 electronic control module
Electronic governing, PTO speed control
Customer programmable ratings
Cold mode start strategy
Automatic altitude compensation
Automatic fuel temperature compensation
Programmable low and high idle, and top engine speed limit
Electronic diagnostics and fault logging
Engine monitoring system
SAE J1939 broadcast (diagnostic and engine status) - cooling system
Gear-driven centrifugal jacket water pump — RH
Integrated thermostat and housing
Engine oil cooler
Optional installed transmission oil cooler - exhaust system
Exhaust manifold — dry
Two vertical exhaust outlets (front and rear) - fuel system
MEUI
Fuel priming pump
Fuel transfer pump
Primary and secondary fuel filter — RH configured for remote mounting (installed RH on shipping plate) - flywheels and flywheel housing
SAE No. 0 or SAE No. 1 flywheel iron housing
SAE No. 0 or SAE No. 1 flywheel
Optional transmission adapter - lube system
Crankcase breather
Oil filter — RH standard, optional LH or remote mount service
Oil level gauge — RH standard, optional LH or dual service
Oil filler — RH standard, optional LH or dual service
Shallow oil pan, rear sump - mounting system
Trunnion front support
Vertical and horizontal pads on rear flywheel housing - protection system
24V electronic
Engine overspeed with optional air shut-offs with indicators
Low engine oil pressure
Fuel filter restriction
Fuel temperature
High engine coolant temperature
Low engine coolant temperature - general
Vibration damper and optional guard
Lifting eyes
Optional customer wiring connector
Service tool connector
Paint — Cat yellow
C32 ACERT™ (Dry Manifold) OPTIONS
- air compressors
- air inlet system
Air cleaner
Air inlet adapters
Turbocharger outlet adapters
Air lines - charging system
Battery chargers
Charging alternators
Alternator mounting
Circuit breakers and mountings - cooling system
Dry charge coolant conditioners
Thermostat housing
Coolant level sensor
Radiator
Blower fans
Suction fans
Fan adapters
Fan drives - emissions
IMO certifications - exhaust system
Elbows
Mufflers - fuel systems
Electric fuel priming pump - instrumentation
Customer management device
Interconnect harness
Gauges and instrument panels - lube system
Oil pans
Oil service side
Oil level gauge
Oil filters
Lubricating oils - mounting system
Structural steel base
Engine support — front
Engine support — rear - power takeoffs
Auxiliary drive
Damper pulley
Hydraulics gear pumps - protection system
Mechanical shutoffs
Solenoid shutoffs - starting system
Electric starting motors - 12V, 24V
Battery sets - 24V
Battery cable
Battery rack
Starting aids - transmission arrangement
Transmissions water lines
Transmissions cooler