C13 ACERT™ DRY MANIFOLD PETROLEUM ENGINE
Cat C13 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C13 ACERT engines to deliver excellent performance with low operating costs and emissions. Equipment powered by C13 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat C13 ACERT™ Industrial Diesel Engine. Ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards.
SPECIFICATIONS
Minimum Rating287.0 bkW
Maximum Rating387.0 bkW
Governor and ProtectionElectronic (ADEM™ A3)
general specifications
Minimum Rating287.0 bkW
Maximum Rating387.0 bkW
Governor and ProtectionElectronic (ADEM™ A3)
RPM2100.0 RPM
AspirationTurbocharged-Aftercooled
Displacement12.5 L
Flywheel and Flywheel HousingSAE 1
Flywheel Teeth113
Rotation (from flywheel end)Counterclockwise
Stroke157.0 mm
Bore130.0 mm
emissions
EmissionsEPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
dimensions
Length1201.0 mm
Width1013.0 mm
Height1186.0 mm
Weight896.0 kg
capacity for liquids
Lube Oil System (refill)34.0 L
Cooling System14.4 L
C13 ACERT™ (Dry Manifold) STANDARD EQUIPMENT
- air inlet system
Turbocharger, mid-mounted
Air inlet elbow 90°, 104.5 mm (4.11" OD) hose connection - control system
Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring system — speed, temperature, pressure
J1939 Broadcast — diagnostic and engine status - cooling system
Thermostats and housing
Jacket water pump — gear-driven
Front water pump inlet - exhaust system
Exhaust manifold — dry
Front turbo exhaust - flywheels and flywheel housings
See Mandatory Options - fuel system
Electronic unit injector
Fuel filter — secondary, mid-mount, (LH 2 micron high performance)
Fuel transfer pump — front
Fuel priming pump — LH mid-mount
Fuel fitting — fuel return connection: straight No. 8, 5/8-18 - lube system
Crankcase breather
Oil cooler
Oil filter — RH
Oil pan — front sump, 40 L capacity
Oil filler — LH front
Oil dipstick — LH front
Oil pump
Oil valve sampling — RH rear engine side - power takeoffs
Crankshaft pulley and damper — 250 mm (9.84 in), 2 grooves 22.3 mm (.87 in) width
Hydraulic pump drive — SAE A, 11-tooth
1.41:1 drive ratio — counterclockwise rotation (45 lb-ft capacity) - general
Vibration damper
Paint — Cat yellow
Lifting eyes
Automatic variable timing, electronic
Electronic installation kit (connectors, pins, sockets)
Literature - mandatory options
Flywheel housing or rear PTO
Throttle position sensor
Primary filter/water separator
C13 ACERT™ (Dry Manifold) OPTIONS
- air compressor
Air compressors
Air chambers
Air compressor governors - air inlet system
Air cleaners
Precleaners
Air lines
Air inlet gasket - beltdriven accessories
Refrigerant compressor and mounting - charging system
Charging alternators
Alternator mountings
Alternator guard
Alternator accessories - control system
Connection - cooling system
Radiator — installed
Fan drive f/u/w Caterpillar installed radiator
Fan drive pulleys f/u/w customer-supplied radiators
Coolant conditioner
Water lines — pump inlet
Fan drive mountings
Fan height instructions
Fan adapters for suction fans and blower fans
Suction fans and blower fans
Coolant level sensor
Aftercooler lines - exhaust system
Muffler
Flexible fitting
Elbows, flange, pipe, clamp
Straight exhaust adapter - fuel system
Fuel lines for fuel filter
Fuel cooler
Fuel fitting — fuel return connection
Flexible fuel lines - instrumentation
Gauges and instrument panels
Voltmeters
Gauge mounting
Ammeter - lube system
Oil pan
Oil pan drain
Oil level gauges
Oil filter — bypass and remote
Lubricating oil
Oil filler
Fumes disposal - mounting system
Front and rear engine supports
Structural steel base - power takeoffs
Crankshaft pulleys
Crankshaft pulley — stack-on
Output flange
Flywheel stub shaft
Front stub shaft
Hydraulic pump drive
Hydraulic pumps — front and rear
Enclosed clutch
Clutch support - protection system
Air shutoff
Air shutoff switch - starting system
Starting System
Starting aids
Battery sets — 24 Volt, dry
Battery cable
Battery rack - transmission arrangement
Transmission cooler