G3406 GAS COMPRESSION ENGINE
Tough and durable, built on the industry-standard G3400 platform bring maximum uptime and low operating cost to your operation. G3406 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime.Ideal applications for G3406 engines include gas lift, gas gathering, and wellhead gas compression. Cat G3406 gas engine. Ratings: 160-242 bkW (215-325 bhp) @ 1800 rpm are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment or available for non-regulated areas.
SPECIFICATIONS
Minimum Rating160.0 bkW
Maximum Rating242.0 bkW
EmissionsNSPS Site Compliant Capable
engine specifications
Minimum Rating160.0 bkW
Maximum Rating242.0 bkW
EmissionsNSPS Site Compliant Capable
Displacement14.59 L
Compression Ratio9.4:1
AspirationNaturally Aspirated or Turbocharged-Aftercooled
Rotation (from flywheel end)Counterclockwise
Flywheel and Flywheel HousingSAE No. 1
Flywheel Teeth113
Weight (dry)1360.8 kg
Oil Change Interval750 hours
Ignition, ProtectionAltronic III
Stroke165.0 mm
Bore137.0 mm
capacity for liquids
Cooling System37.9 L
Lube Oil System (refill)75.7 L
G3406 STANDARD EQUIPMENT
- air inlet system
Air cleaner — heavy-duty
Air cleaner rain cap
Service indicator - control system
Governor — Woodward PSG mechanical
Governor locking — positive control - cooling system
Thermostats and housing
Jacket water pump
Aftercooler water pump
Aftercooler core - exhaust system
Watercooled exhaust manifolds
Dry exhaust elbow - flywheel
Flywheel Housing - sae no 1 flywheel###sae no 1 flywheel housing###sae standard rotation
Fuel System - gas pressure regulator###natural gas carburetor
Ignition System - altronic iii ignition system
Instrumentation - service meter
Lube System - crankcase breather — top mounted###oil cooler###oil filter — rh###auxiliary oil reservoir###oil pan — full sump###oil filler in valve cover dipstick — rh
Mounting System - engine supports
Protection System - shutoffs
General - paint — cat yellow###crankshaft vibration damper and drive pulleys###lifting eyes
G3406 OPTIONS
- air inlet system
Precleaner - charging system
Battery chargers
Charging alternators
Charging alternators f/u/w c customer supplied shutoffs
Ammeter gauge
Ammeter gauge and wiring
Control mounting - control system
PSG Woodward governor - cooling system
Radiators
Non-sparking blower fan
Blower fans for customer supplied radiators
Fan drives for customer supplied radiators
ATAAC conversion
Aftercooler
Expansion tank
Heat exchangers - exhaust system
Flexible fittings
Elbow
Flange
Pipe
Rain cap
Muffler - fuel system
Fuel filter
Natural gas valve and jet kits - ignition system
CSA shielded ignition
Wiring harness - instrumentation
Gauges and instrument panels - lube system
Auxiliary oil reservoir removal
Lubricating oil - mounting system
Vibration isolators - power takeoffs
Auxiliary drive pulleys
Enclosed clutch and clutch support
Front stub shaft and flywheel stub shaft - protection system
Gas valves - starting system
Air starting motor
Electric air start control
Air pressure regulator
Air silencer
Electric starting motor— single 12- and 24-volt
Starting aids
Battery sets, cables, and rack - general
Damper guard