3516 OFFSHORE PRODUCTION ENGINE
Cat 3516 Diesel Fire Pump Engine. Ratings: 1417-1480 bkW (1900-1985 bhp) @ 1460-1750 rpm are non-certified, Not FM Approved, Not UL Listed. They are available for global non-regulated areas.p Engine, 1417-1480 bkW (1900-1985 bhp) @ 1460-1750 rpm. Non-Certified rating. Available for global non-regulated areas.
SPECIFICATIONS
Minimum Rating1417.0 bkW
Maximum Rating1480.0 bkW
EmissionsNon certified
engine specifications
Minimum Rating1417.0 bkW
Maximum Rating1480.0 bkW
EmissionsNon certified
Bore170.0 mm
Stroke190.0 mm
Displacement69.0 L
AspirationTurbocharged Aftercooled
Engine Weight, net dry8074.0 kg
Rotation (from flywheel end)Counterclockwise
Flywheel and Flywheel HousingSAE No. 0
Flywheel Teeth151
capacity for liquids
Lube Oil System (refill)405.0 L
Cooling System (engine only)235.0 L
dimensions
Length3730.0 mm
Width1744.0 mm
Height1902.0 mm
3516 STANDARD EQUIPMENT
- air inlet system
Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
Turbocharger, rear mounted
Jacket water aftercooled - control system
Charging alternator 24 volt, 35 amp
Governor, RH, 3161 with self contained synthetic oil sump
Air-fuel ratio control
Mechanical speed control, without torque control
Governor control
Positive locking - cooling system
Thermostats and housing
Jacket water pump, centrifugal - exhaust system
Exhaust manifold, dry - flywheels and flywheel housing
SAE No. 0 flywheel
151 flywheel teeth
SAE No. 0 flywheel housing
SAE standard rotation - fuel system
Fuel filter, with service indicators, cartridge type with RH service
Fuel transfer pump - instrumentation
Instrument Panel, RH
Engine oil pressure gauge
Fuel pressure gauge
Oil filter differential gauge
Jacket water temperature gauge
Service meter, electric
Tachometer - lube system
Crankcase breather, top mounted
Oil cooler
Oil filler
Oil dipstick
Oil pump
Oil filter, cartridge type with RH service
Shallow oil pan
Fumes disposal (not installed) - mounting system
Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
Included on selected top level engines - power take off
Accessory drive, upper RH
Front housing, single sided - protection system
Junction box
Manual shutoff, RH
Safety shutoff protection, energized to shutdown
Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
Water temperature
Overspeed
3161 governor solenoid energized to shutdown - starting system
Starting switch - general
Vibration damper
Lifting eyes
Paint: Caterpillar yellow, with optional colors available at request
3516 OPTIONS
- lubrication system
Oil level regulator - power takeoff
Two sided front housing