CAT C32 ACERT PROPULSION ENGINE (IMO II)
The C32 ACERT marine propulsion engine is available at ratings that meet IMO II emissions regulations. It has a separate circuit aftercooling system (SCAC) for A through C ratings, six ratings with Wide Operating Speed Range (WOSR) and extended oil change intervals. Other benefits include proven engine operating history and performance iron with thousands of validation testing hours for quality and durability. The C32 ACERT marine engine is supported by the extensive Cat global dealer network and Caterpillar’s 60 month standard warranty.
SPECIFICATIONS
Power Range660-1450 bhp (492-1081 bkW)
Speed Range1600-2300 rpm
ConfigurationVee 12, 4-Stroke-Cycle Diesel
power rating
Power Range660-1450 bhp (492-1081 bkW)
engine specifications
Speed Range1600-2300 rpm
ConfigurationVee 12, 4-Stroke-Cycle Diesel
AspirationTTA
Bore145.0 mm
Stroke162.0 mm
Displacement32.1 L
Rotation (from flywheel end)Counterclockwise
EmissionsIMO II, EU IW
dimensions
WeightsMinimum Length
21210 mm
Dimensions Weights
maximum length
2284.0 mmDimensions
weights
Minimum Width1528.0 mm
dimensions
WeightsMaximum Width
15280 mm
Dimensions Weights
minimum height
1547.0 mmDimensions
weights
Maximum Height1587.0 mm
dimensions
WeightsMinimum Dry Weight
31520 kg
C32 ACERT IMO II STANDARD EQUIPMENT
- air inlet system
Separate Circuit After-Cooled (SCAC
Air cleaner
Turbochargers, jacket water cooled
Turbochargers inlet, 152 mm (6 in) OD straight connection - control system
Programmable Low Idle (550 - 750 rpm)
WOSR (Wide Operating Speed Range) available for - A, B, - c ratings###programmable high idle limit for wosr ratings###electronic diagnostics and fault logging###engine and transmission monitoring speed temperature pressure###electronic fuelair ratio control###engine protection mode for extended ambient conditions###torque limiting functionality for wosr ratings only###70pin customer connector###throttle input signal options
COOLING SYSTEM - separate circuit aftercooling scac for heat exchanged hex
Keel cooled engines
Jacket Water (JW) and SCAC Heat Exchangers Shell - tube for hex cooled engines###scac pump gear driven###jacket water pump gear driven###sea water pump bronze impeller gear driven for hex cooled engines only###sea water pump
JW Heat Exchanger Connection: 76.2 mm (3in) ID Standard
Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
SCAC and JW shunt tanks for maintaining proper pump inlet pressures - exhaust system
4 Bolt 130 mm (5.12 in) diameter flanged outlet
Water-cooled exhaust manifold - turbocharger
FLYWHEELS - flywheel housings
SAE standard rotation (CCW facing exciter end)
Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth - fuel system
Duplex Fuel Filters, Spin-on, RH - lh service###fuel connections sizesupply jic 37 deg 10 7814 return jic 37 deg 8 3416###plate type fuel cooler installed behind aftercooler shunt tank###fuel transfer pump gear driven###manual fuel priming pump###hybrid fuel line design
LUBE SYSTEM - simplex oil filters rh or lh service###deep sump oil pan###rh or lh service oil filler locations###rh or lh service dipstick###oil pump gear driven
MOUNTING SYSTEM - front support adjustable
POWER TAKE-OFFS - front polyv groove pulley quantity 1 for auxiliary drives
GENERAL - common electrical bonding point###engine does not ship with zinc components
C32 ACERT IMO II OPTIONS
- air inlet systems
Air Inlet Cleaner
Air Inlet Adapter - charging systems
Battery Charger
Charging Alternators
Ammeter - cooling system
Marine Gear/Transmission Oil Coolers
Connections - exhaust system
Dual Elbow
Flexible Fitting
Dual Muffler
Muffler Spark Arresting
Flange - fuel system
Water Separator - instrumentation
OEM Wiring Harness
Engine to Engine Harness
Instrument Panels
Exhaust Temperature Sensors
Wiring Harness
Gauges
Transmission Sensors - lube system
Transmission Oil Cooler
Manual Sump Pump
Duplex Oil Filters - protection system
Fuel and Oil Shielding - starting system
Air Starting Motor
Air Start Accessories
Electric Starting Motors - Single 24 Volt
Starting Aids
Battery Sets - 24 Volt - Dry
Dual Starting Motors (Electric and Air) - packing
Engine Protective Cover
Export Packing
Storage Preservation - mounting system
Front Support
Adapter Kits
Isolator Mounts - power takeoffs
Front Enclosed Clutches
Rear Hydraulic Pump Drive - general
Fumes Disposal - control system
Instrument Panels
CATERPILLAR ALARM AND PROTECTION
Fuel and Oil Shielding