3516C PROPULSION ENGINE (TIER 3)
Back to the list
The 3516C propulsion engine is available with a wide range of ratings that meet EPA Tier 3 and IMO II regulations without any additional aftertreatment. These engines provide efficient operation with electronic governing, cold mode start strategy, and programmable low idle to minimize fuel consumption. The 3516C engine also incorporates a closed crankcase ventilation system to lower emissions.
SPECIFICATIONS
Power Range2131-2675 bhp (1590-1995 bkW)
Speed Range1600 rpm
ConfigurationVee 16, 4-Stroke-Cycle Diesel
power rating
Power Range2131-2675 bhp (1590-1995 bkW)
engine specifications
Speed Range1600 rpm
ConfigurationVee 16, 4-Stroke-Cycle Diesel
AspirationTTA
Bore170.0 mm
Stroke215.0 mm
Displacement78.0 L
Rotation (from flywheel end)Counterclockwise
EmissionsEPA Tier 3, IMO II
dimensions
WeightsLength
31920 mm
Dimensions Weights
width
2284.0 mmDimensions
weights
Height2225.0 mm
dimensions
WeightsDry Weight
96000 kg
3516C Tier 3 STANDARD EQUIPMENT
- air inlet system
Corrosion-resistant separate circuit aftercooler core, air cleaners with service indicator, dual turbochargers, closed crankcase ventilation system - control system
Dual A4 engine control modules provide engine control and monitoring, rigid wiring harness with plug and run connectors on port and starboard sides - cooling system
Separate circuit auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing - exhaust system
Dry gas-tight exhaust manifolds with SOLAS compliant stainless steel heat shields, dual turbochargers with water-cooled bearings and heat shields, modular pulse exhaust manifold, single exhaust outlet - fuel system
Electronically controlled unit injectors, fuel filter with service indicators, fuel transfer pump, SOLAS compliant fuel connections with spill shield - instrumentation
Instrument panel shipped loose with Color Marine Power Display (MPD), alarm horn, overspeed shutdown notification light, emergency stop notification light, secondary ECU “Ready” light, secondary ECU “Active” light, graphic display unit for analog or digital display of oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous) - lube system
Pre-lube strategy, top-mounted dual crankcase breathers, oil filter with service indicators, oil level gauge, oil filler, gear-type oil pump - power takeoffs
Accessory drives — upper RH, upper and lower LH; two-sided front housing - protection system
A4 electronic control module with customer programmable engine derate strategies, engine alarms and diagnostics displayed on local and remote MPDs, emergency stop pushbutton, safety shutoff protection for oil pressure and water temperature, overspeed protection - general
Vibration damper and guard, Cat® yellow paint, two lifting eyes attach to engine block, - iso certification
Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities - mounting system
Mounting rails
3516C Tier 3 OPTIONS
- air inlet system
Air Cleaner Removal
Remote Air Inlet Adapters - charging system
Battery Charger
Charging Alternator - control system
Throttle Position Sensor
Throttle Synchronization - cooling system
Water Level Switch Gauge
Coolant Level Sensors
Connections
Keel Cooling Conversions
Heat Exchangers
Auxiliary Water Pumps
Sea Water Pump Removal
Coolant Shunt Tanks
Air Separator
Marine Gear Cooling - exhaust system
Exhaust Outlet
Flexible Fittings
Elbows
Flanges
Flange and Exhaust Expanders
Mufflers - fuel system
Fuel Cooler
Fuel Priming Pumps
Flexible Fuel Lines
Rigid Fuel Lines
Primary Fuel Filter
Fuel level switch - instrumentation
PL1000T Communication Module
PL1000E Communication Module
Customer Interface
Thermocouples
Remote Panel Display
Remote Cylinder Temperature Display
Pilot House Instrument Panels
Marine Gear Sensors
Engine Vision Display System - lube system
Oil Pan
Oil Pan Accessories
Sump Pumps
Prelubrication Options
Lubricating Oil
Centrifugal Oil Filter - mounting system
Engine Supports
Vibration Isolation Mountings - power takeoffs
Flexible Coupling and Guards
Front Housing Accessories
Front Housing Accessory Drives
Upper LH Accessory Drive
Upper RH Accessory Drive
Front Power Take Offs
Crankshaft Pulleys
Damper Guard Removals - protection system
Air Inlet Shutoffs
Switches and Contactors
Explosion Relief Valve
Sensors - spare parts kits
Parts Kits
Pump Kits
Fuel Transfer
Lube Oil - special appearance
Chrome Plated Relief Valves
Black Air Cleaners - starting system
Starting Motors or Barring Device
Air Starting Motors Options
Starting Aids
Battery Sets - 24 Volt - Dry
Battery Rack - general
Tool Set
Caterpillar Datalink Wire