CAT® 3516C INDUSTRIAL POWER UNIT
The Cat® 3516C Industrial Power Unit is offered at 1566 bkW (2100 bhp) @ 1750 rpm and is U.S. EPA Tier 2 Nonroad Equivalent. Conveniently pre-configured for a wide range of applications, the 3516C Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
Minimum Power1566 bkW
Maximum Power1566 bkW
Rated Speed1750 rpm
power rating
Minimum Power1566 bkW
Maximum Power1566 bkW
Rated Speed1750 rpm
emission standards
EmissionsU.S. EPA Tier 2 Nonroad equivalent emission standards (not currently EPA certified)
general
Engine ConfigurationV-16, 4-Stroke-Cycle Diesel
Bore170 mm (6.7 in)
Stroke215 mm (8.5 in)
Displacement78 L (4760 in³)
AspirationTurbocharged Aftercooled
Compression Ratio13.0:1
Rotation (from flywheel end)Counterclockwise
Lube System (refill)401.3 l (424 qt)
engine dimensions approximate final dimensions dependent on selected options
Length3278 mm (129 in)
Width1530 mm (60 in)
Height2062 mm (81 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 7840 kg (17,284 lb)
3516C Industrial Power Unit STANDARD EQUIPMENT
- air inlet system
Aftercooler core, corrosion resistant coated (air side)
Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
Turbocharger, rear mounted
Jacket water aftercooled - control system
Governor, RH, 3161 with self contained synthetic oil sump
Air-fuel ratio control
Mechanical speed control, without torque control
Governor control
Positive locking - cooling system
Thermostats and housing
Jacket water pump, centrifugal - exhaust system
Exhaust manifold, dry - flywheels and flywheel housing
SAE No. 00 flywheel
183 flywheel teeth
SAE No. 00 flywheel housing - fuel system
Fuel filter, with service indicators, cartridge type with RH service
Fuel transfer pump - instrumentation
Instrument Panel, RH
Engine oil pressure gauge
Fuel pressure gauge
Oil filter differential gauge
Jacket water temperature gauge
Service meter, electric
Tachometer - lube system
Crankcase breather, top mounted
Oil cooler
Oil filler
Oil dipstick
Oil pump
Oil filter, cartridge type with RH service
Shallow oil pan - mounting system
Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel. - power take off
Accessory drive, upper RH
Front housing, single sided - protection system
Junction box
Manual shutoff, RH
Safety shutoff protection, energized to shutdown
Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
Water temperature
Overspeed
3161 governor solenoid energized to shutdown - starting system
Starting switch - general
Vibration damper
Lifting eyes
Paint: Caterpillar yellow, with optional colors available at request