CAT® C7 ACERT™ INDUSTRIAL POWER UNIT
The Cat® C7 ACERT™ Industrial Power Unit is offered in ratings ranging from 168-205 bkW (225-275 bhp) @ 1800-2200 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
Minimum Rating168.0 bkW
Maximum Rating205.0 bkW
Rated Speed2200 rpm
power rating
Minimum Rating168.0 bkW
Maximum Rating205.0 bkW
Rated Speed2200 rpm
emission standards
EmissionsChina Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
general
Engine ConfigurationInline 6, 4-Stroke-Cycle Diesel
Bore110 mm (4.33 in)
Stroke127 mm (5.0 in)
Displacement7.2 L (442 in³)
AspirationTurbocharged Aftercooled (TA)
Compression Ratio17:1
Rotation (from flywheel end)Counterclockwise
power unit dimensions approximate final dimensions dependent on selected options
Length2029.5 mm (79.9 in)
Width974.8 mm (38.4 in)
Height1986.3 mm (78.2 in)
Weight - Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)1250 kg (2756 lb)
C7 ACERT™ STANDARD EQUIPMENT
- air inlet system
Turbocharged
Air-to-Air Aftercooled - control system
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM™ A4 Electronic Control Unit (ECU) - cooling system
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet - exhaust system
Exhaust manifold, dry
Optional exhaust outlet - flywheels and flywheel housing
SAE No. 1 flywheel housing - fuel system
HEUI™ injection
Fuel filter, secondary (2 micron)
ACERT™ Technology
Fuel transfer pump
Fuel priming pump - lube system
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump - general
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request