CAT® C9.3 ACERT™ INDUSTRIAL POWER UNIT
The Cat® C9.3 ACERT™ Industrial Diesel Power Unit is offered in ratings ranging from 224-298 bkW (300-400 bhp) @ 1800-2200 rpm and meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Conveniently pre-configured for a wide range of applications, the Cat® Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
SPECIFICATIONS
Minimum Power224.0 bkW
Maximum Power298.0 bkW
Rated Speed1800-2200 rpm
power rating
Minimum Power224.0 bkW
Maximum Power298.0 bkW
Rated Speed1800-2200 rpm
emission standards
EmissionsU.S. EPA Tier 4 Final, EU Stage IV
general
Engine ConfigurationInline 6, 4-Stroke-Cycle-Diesel
Bore115 mm (4.53 in)
Stroke149 mm (5.87 in)
Displacement9.3 L (567.5 in³)
AspirationTurbocharged Aftercooled (TA)
Compression Ratio17:1
Rotation (from flywheel end)Counterclockwise
Cooling System Capacity64 L (68 qt)
Lube System (refill)30 L (31.7 qt)
power unit dimensions approximate final dimensions dependent on selected options
Length1845-2042 mm (72.6-80.4 in)
Width1094-1118 mm (43.1-44 in)
Height1554-1741 mm (61.2- 68.5 in)
Weight - Approximate, Net Dry (Standard configuration without oil, cooling, clutch, compressor, A/C)1678-1839 kg (3699-4055 lb)
aftertreatment dimensions approximate final dimensions dependent on selected options
Diameter304.8-330.2 mm (12-13 in)
Width714.4-870 mm (28.12-34.25 in)
Height392.21-570 mm (15.44-22.4 in)
Weight130-212 kg (287-467 lb)
petu dimensions tier 4 final stage iv only
Volume Capacity48.4 L (51.1 qt)
Length854 mm (33.6 in)
Width287 mm (11.3 in)
Height551 mm (21.7 in)
Weight19.42 kg (42.8 lb)
C9.3 ACERT™ STANDARD EQUIPMENT
- air inlet system
Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV) - control system
Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Remote fan control - cooling system
Vertical or RH thermostat outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability - flywheels and flywheel housing
Dual rear PTO configuration
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV). - fuel system
Electronic high pressure common rail
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming - lube system
Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV) - power take off pto
SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications. - general
Vibration damper
Lifting eyes - us epa tier 4 interim eu stage iiib aftertreatment clean emissions control equipment
Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
NOx Reduction System (NRS)
Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
Available in 12 volt or 24 volt systems - us epa tier 4 final eu stage iv aftertreatment clean emissions control equipment
Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Available in 12V or 24V systems
Selective Catalytic Reduction (SCR)