CAT® C13 ACERT™ INDUSTRIAL DIESEL ENGINE
The Cat® C13 ACERT™ Industrial Diesel Engine is offered in ratings ranging from 287-388 bkW (385-520 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards. Industries and applications powered by C13 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment.
SPECIFICATIONS
Minimum Power287.0 bkW
Maximum Power388.0 bkW
Rated Speed1800-2100 rpm
power rating
Minimum Power287.0 bkW
Maximum Power388.0 bkW
Rated Speed1800-2100 rpm
emission standards
EmissionsChina Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
general
Engine ConfigurationInline 6, 4-Stroke-Cycle Diesel
Bore130 mm (5.12 in)
Stroke157 mm (6.18 in)
Displacement12.5 L (762.8 in³)
AspirationTurbocharged Aftercooled (TA)
Compression Ratio17.3:1
Combustion SystemDirect Injection
Rotation (from flywheel end)Counterclockwise
engine dimensions approximate final dimensions dependent on selected options
Length1295 mm (50.98 in)
Width1186 mm (346.69 in)
Height1053.8 mm (41.49 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 908.4 kg (2002.7 lb)
C13 ACERT™ STANDARD EQUIPMENT
- air inlet system
Turbocharged
Air-to-Air Aftercooled - control system
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM™ A4 Electronic Control Unit (ECU) - cooling system
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet - exhaust system
Exhaust manifold, dry
Optional exhaust outlet - flywheels and flywheel housing
SAE No. 1 flywheel housing - fuel system
MEUI injection
Fuel filter, secondary (2 micron)
Fuel filter, tertiary (2 micron)
ACERT™ Technology
Fuel transfer pump
Fuel priming pump - lube system
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump - general
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request