Saudequip

LEGAL NOTICE & CREDITS © 2024 Saudequip

Saudequip

HOME BRANDS & PRODUCTS CAT PRODUCT LINE POWER SYSTEMS INDUSTRIAL INDUSTRIAL DIESEL ENGINES - LESSER REGULATED & NON-REGULATED CAT® C1.5 DIESEL ENGINE

CAT® C1.5 DIESEL ENGINE

Back to the list

The Cat® C1.5 Industrial Diesel Engine is offered in ratings ranging from 20.9-30 bkW (28-40.2 bhp) @ 2200-3000 rpm. These ratings meet EU Stage IIIA emission standards. Applications powered by C1.5 engines include: Agriculture Tractors, Combines and Harvesters, Aircraft Ground Support, Bore/Drill Rigs, Chippers, Grinders, Compactors, Rollers, Compressors, Construction, Irrigation, Pumps, Turf, Landscaping, Mobile Earthmoving, Paving, Trenchers, Underground Mining, and Material Handling.

SPECIFICATIONS

Minimum Power20.9 bkW

Maximum Power30.0 bkW

Rated Speed2200-3000 rpm

power rating

Minimum Power20.9 bkW

Maximum Power30.0 bkW

Rated Speed2200-3000 rpm

emission standards

EmissionsU.S. EPA Tier 4 Interim Equivalent

general

Engine ConfigurationInline 3, 4-Stroke-Cycle Diesel

Bore84 mm (3.3 in)

Stroke90 mm (3.5 in)

Displacement1.496 L (91 in³)

AspirationNaturally Aspirated (NA) or Turbocharged (T)

Compression Ratio22.5:1

Combustion SystemIndirect Injection

Rotation (from flywheel end)Counterclockwise

Lube System (refill)6 L (6.3 qt)

engine dimensions approximate final dimensions dependent on selected options

Length572 mm (22.5 in)

Width453-512 mm (17.8-20.2 in)

Height643 mm (25.3 in)

Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 149-156.5 kg (328-345 lb)

C1.5 STANDARD EQUIPMENT

  • air inlet system
    Inlet manifold with choice of inlets.
  • control system
    Alternator 12 volt 65 amp
    Starter motor 12 volt
    Glow plug starting aid
    Tier 4 Final: Alternator 12V 85 amp
  • cooling system
    Belt-driven coolant pump
    Coolant temperature switch
    Choice of cooling fans
  • flywheel
    Flywheel Housing
  • naturally aspirated sae no 7 12 flywheel###turbocharged sae no 6 12 or sae no 7 12 flywheel###epa tier 4 final turbocharged sae no 7 12 flywheel###naturally aspirated choice of sae no 4 or standard backplate flywheel housing###turbocharged choice of sae no 4 or sae no 5 or standard backplate flywheel housing###tier 4 final turbocharged choice of sae no 4 or sae no 5 or standard backplate flywheel housing
    Fuel System
  • fuel injection pump###spinon fuel filter###electronic shutoff solenoid esos
    Lube System
  • alternative oil fillers###spinon lube oil filter###lube oil pressure switch###lube oil sump
    General
  • cast iron engine block###cast iron exhaust manifoldside outlet###cold start capability to 20° c 4° f###gradeability 35° continuous###paint caterpillar yellow with optional colors available at request
Back

MOTEUR