Saudequip

LEGAL NOTICE & CREDITS © 2024 Saudequip

Saudequip

HOME BRANDS & PRODUCTS CAT PRODUCT LINE POWER SYSTEMS INDUSTRIAL INDUSTRIAL DIESEL ENGINES - LESSER REGULATED & NON-REGULATED CAT® C0.5 DIESEL ENGINE

CAT® C0.5 DIESEL ENGINE

Back to the list

The C0.5 Industrial Diesel Engine is offered in ratings ranging from 8.2-10.2 bkW (11.0-13.7 bhp) @ 2800-3600 rpm. These ratings are available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C0.5 engines include Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.

SPECIFICATIONS

Minimum Power8.2 bkW

Maximum Power10.2 bkW

Rated Speed2800-3600 rpm

power rating

Minimum Power8.2 bkW

Maximum Power10.2 bkW

Rated Speed2800-3600 rpm

emission standards

EmissionsU.S. EPA Tier 4 Interim Equivalent. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards.

general

Engine ConfigurationInline 2, 4-Stroke-Cycle Diesel

Bore67 mm (2.64 in)

Stroke72 mm (2.83 in)

Displacement0.5 L (31 in³)

AspirationNaturally Aspirated (NA)

Compression Ratio23.5:1

Combustion SystemIndirect Injection

Rotation (from flywheel end)Counterclockwise

Lube System (refill)1.61-2.01 L (1.70-2.12 qt)

engine dimensions approximate final dimensions dependent on selected options

Length407 mm (16 in)

Width371 mm (14.6 in)

Height523 mm (20.6 in)

Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 57 kg (126 lb)

C0.5 STANDARD EQUIPMENT

  • air inlet system
    Inlet manifold with choice of inlets.
  • control system
    Alternator 12 volt 14 amp
    Starter motor 12 volt
    Glow plug starting aid
  • cooling system
    Belt-driven coolant pump
    Coolant temperature switch
    Choice of cooling fans
  • flywheel and flywheel housing
    SAE No. 6 1/2 flywheel
    Choice of SAE No. 5 or standard backplate flywheel housing
  • fuel system
    Fuel injection pump
    Spin-on fuel filter
    Electronic Shut-off Solenoid (ESOS)
  • lube system
    Closed circuit breather
    Spin-on lube oil filter
    Lube oil pressure switch
    Lube oil sump
  • general
    Cast iron, engine block
    Cast iron exhaust manifold--side outlet
    Cold start capability to -20° C (-4° F)
    Gradeability 35° continuous
    Paint: Caterpillar yellow, with optional colors available at request
Back

MOTEUR