CAT® 3516C INDUSTRIAL DIESEL ENGINE
The Cat® 3516C is offered at 1506 bkW (2100 bhp) @ 1750 rpm. This engine is available using EPA (U.S.) Flex provisions and for other global regulated and non-regulated areas. It offers unsurpassed performance and durability in a multitiude of industries and applications, including Bore and Drill Rigs, Chippers, Grinders, and Shredders, Cranes, Dredgers, Forestry, Material Handling, Mining and Pumps.
SPECIFICATIONS
Minimum Power1506 bkW
Maximum Power1506 bkW
Rated Speed1750 rpm
power rating
Minimum Power1506 bkW
Maximum Power1506 bkW
Rated Speed1750 rpm
emission standards
EmissionsU.S. EPA Tier 2 Nonroad Equivalent Emission Standards (Not Currently EPA Certified)
general
Engine ConfigurationV-16, 4-Stroke-Cycle Diesel
Bore170 mm (6.7 in)
Stroke215 mm (8.5 in)
Displacement78 L (4760 in³)
AspirationTurbocharged Aftercooled
Compression Ratio14.7:1
Rotation (from flywheel end)Counterclockwise
Lube System (refill)807 L (852 qt)
engine dimensions approximate final dimensions dependent on selected options
Length3278 mm (129.1 in)
Width1530 mm (60.2 in)
Height2062 mm (81.2 in)
Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 7840 kg (17284 lb)
3516C STANDARD EQUIPMENT
- air inlet system
Air to Air Aftercooled (ATAAC)
Four turbochargers, center mounted - control system
ADEM A4 ECM Electronic Engine Control, RH (10 amp DC power required) - cooling system
Thermostats and housing
Gear driven centrifugal jacket water pump
Connections for radiator cooling - exhaust system
Exhaust manifold, dry
Four turbochargers with watercooled bearings
Two exhaust outlets, 203 mm (8 in) round flange - flywheels and flywheel housing
SAE No. 00 flywheel (183 teeth)
SAE No. 00 flywheel housing - fuel system
Fuel filter, LH spin-on type
Fuel transfer pump
Electronically controlled unit injectors - instrumentation
No standard instrument or gauge panel - lube system
Crankcase breather, top mounted
Oil cooler
Oil filler and dipstick, LH
Oil pump
Oil filter, LH, spin-on type
Front sump oil pan, 500-hour change interval - mounting system
Trunnion front support - power take off
Front housing, two-sided - protection system
ADEM A4 ECM monitoring system to provide customer programmable engine
Deration strategies to protect against adverse operating conditions
Emergency stop logic inputs provided at 40 pin customer interface connection - starting system
Dual 24V electric starting motor, LH, unwired - general
Paint: Caterpillar yellow
Vibration damper
Lifting eyes