CAT® C1.5 DIESEL ENGINE
The Cat® C1.5 Industrial Diesel Engine is offered in ratings ranging from 18.4-27.6 bkW (24.7-37.0 bhp) @ 1800-3000 rpm and meet U.S. EPA Tier 4 Final emission standards. Ratings: 20.9-30.0 bkW (28.0-40.2bhp) @ 2200-3000 rpm meet EU Stage IIIA emission standards and are also available in Europe and other regions. Industries and applications powered by C1.5 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers and Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Turf and Landscaping, Underground Mining Equipment and Welders.
SPECIFICATIONS
Minimum Power18.4 bkW
Maximum Power30.0 bkW
Rated Speed2100-3000 rpm
power rating
Minimum Power18.4 bkW
Maximum Power30.0 bkW
Rated Speed2100-3000 rpm
emission standards
EmissionsU.S. EPA Tier 4 Final or EU Stage IIIA
general
Engine ConfigurationIn-Line 3, 4-Stroke-Cycle Diesel
Bore84 mm (3.3 in)
Stroke90 mm (3.5 in)
Displacement1.496 L (91 in³)
AspirationNaturally Aspirated (NA) or Turbocharged (T)
Compression Ratio22.5:1
Combustion SystemIndirect Injection
Rotation (from flywheel end)Counterclockwise
Cooling System Capacity2.6 L (2.75 qt)
Lube System (refill)6 L (6.3 qt)
engine dimensions approximate final dimensions dependent on selected options
Length572 mm (22.5 in)
Width453-512 mm (17.8-20.2 in)
Height643 mm (25.3 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)149-156.5 kg (328.5-345 lb)
aftertreatment dimensions approximate final dimensions dependent on selected options
Length449 mm, 17.6 in (Tier 4 Final only)
Weight13 kg (28.7 lb) (Tier 4 Final, >19 kW/25 hp only)
Diameter170 mm (6.7 in) (Tier 4 Final only)
C1.5 STANDARD EQUIPMENT
- air inlet system
Inlet manifold with choice of inlets. - control system
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Tier 4 Final: Alternator 12V 85 amp - cooling system
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans - flywheel
Flywheel Housing - naturally aspirated sae no 7 12 flywheel###naturally aspirated choice of sae no 4 or standard backplate flywheel housing###turbocharged sae no 6 12 or sae no 7 12 flywheel###turbocharged choice of sae no 4 or sae no 5 or standard backplate flywheel housing###epa tier 4 final turbocharged sae no 7 12 flywheel###tier 4 final turbocharged choice of sae no 4 or sae no 5 or standard backplate flywheel housing
Fuel System - fuel injection pump###spinon fuel filter###electronic shutoff solenoid esos
Lube System - alternative oil fillers###spinon lube oil filter###lube oil pressure switch###lube oil sump
Power Take Off (PTO) - provision for power take off pto
General - cast iron engine block###cast iron exhaust manifoldside outlet###cold start capability to 20° c 4° f###gradeability 35° continuous
Tier 4 Final Aftertreatment / Clean Emissions Control Equipment) - diesel particulate filter dpf###diesel oxidation catalyst doc###passive regeneration system with backup