824K WHEEL DOZER

Delivering the efficiency and productivity you demand through integrated machine systems.

BENEFITS AND FEATURES

Efficiency with Autoshift The Autoshift mode, when active, allows the machine to automatically upshift or downshift based on machine speed, optimizing performance and thus saving fuel. This feature can be easily enabled or disabled on the soft keypad.

Decelerator Pedal The left pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. This enables the operator to slow down when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button again. This aids in maneuvering around trucks, tractors or any other obstacle.

Steering and Transmission Integrated Control System (STIC™) Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

• Simple side-to-side motion turns machine right or left, minimizing operator movements
• Easy to operate finger controlled gear selection
• Smoother, faster cycles help reduce operator fatigue through the use of low effort integrated controls

Steering System Confident machine operation starts with precise machine control enabled by the 824K’s load sensing hydraulic steering system.

• Increase efficiency with our variable displacement piston pumps
• Achieve precise positioning for easy loading in tight areas with 43 degrees each way of steering articulation
• Enhance operator comfort with integrated steering and transmission control functions

Electro Hydraulic Controls Operators increase productivity with our responsive implements feature.

• Operate comfortably through electronically controlled hydraulic cylinder stops
• Handle easy-to-use soft detent controls

Purpose-built from the ground up for the toughest conditions.

BENEFITS AND FEATURES

Robust Structures Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

• Full box-section rear frame resists torsional shock and twisting forces
• Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame
• Axle mounting has been optimized for increased structural integrity

Push Beam and Push Arm Dozer Arrangement To ensure long life and reliability, solid one piece push beams are through-width, not merely attached to the side of the frame. In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.

Operate more efficiently with improved power and control.

BENEFITS AND FEATURES

Cat Planetary Powershift Transmission Building your success begins with a best-in-class transmission.

• Consistent, smooth shifting and efficiency through integrated electronic controls that utilize Single Clutch Speed Shifting (SCSS).
• Long life and reliability through heat treat gear and metallurgy.
• Four forward and four reverse speeds to match your application.

Cat Torque Converter (TC) with Lock-up Clutch

• Eliminates TC losses while lowering system heat
• Improves travel speeds
• Increases fuel efficiency

Cat C15 ACERT Engine The Cat C15 ACERT engine is built and tested to meet your most demanding applications. Two engine options are available that meet U.S. EPA Tier 4 Final/EU Stage IV emission standards or U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards.

• Fully integrated electronic engine controls works in concert with the entire machine to make your fuel go farther.
• Use less fuel idling with Engine Idle Shutdown.
• Maximized durability with Delayed Engine Shutdown.

Best-in-class operator comfort and ergonomics.

BENEFITS AND FEATURES

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Entry and Exit Enter and exit the cab easily and safely with these newly designed, ergonomic features.

• Fold up STIC steer/armrest
• Reduced access stairway angles
• Standard stairway lighting

Cat Comfort Series III Seat Enhance comfort and help reduce operator fatigue with Cat Comfort Series III seat.

• Mid back design and extra thick, contoured cushions
• Air suspension system
• Easy-to-reach seat levers and controls for six way adjustments
• Seat-mounted implement pod and STIC steer that moves with the seat
• 76 mm (3 in) wide retractable seat belt

Control Panel Ergonomic placement of switches and information display keep your operators comfortable all day every day.

• Large backlit membrane switches feature LED activation indicators
• Switches feature ISO symbols for quick function identification
• Two position rocker switch activates the electro hydraulic park brake

Environment Your operator’s productivity is enhanced with our clean, comfortable cab environment.

• Experience reduced vibrations from isolation cab mounts and seat air suspension.
• Maintain desired cab temperature with automatic temperature controls.
• Pressurized cab with filtered air
• Reduced sound levels
• Convenient floor storage tray/lunch box

Monitor, manage, and enhance your job site operations

BENEFITS AND FEATURES

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you’ll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Safety – enhance job site awareness to keep your people and equipment safe.

LINK Technologies LINK technologies like Product Link™ wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. Track location, hours, fuel usage, idle time, and event codes through the online VisionLink® interface so you can make timely, fact-based decisions that can boost job site efficiency and productivity, and lower operating costs. VIMS™ data, like events, histograms, and historical trends, can be downloaded for analysis, giving you the information you need to proactively maintain fleet health and optimize performance and uptime.

DETECT Technologies DETECT technologies like the rear-vision camera enhance awareness by expanding your view of the environment around working equipment so you can work at peak potential, with confidence.

Enabling high uptime by reducing your service time.

BENEFITS AND FEATURES

We can help you succeed by ensuring your 824K has design features to reduce your downtime.

• Safe and convenient service with ground level or platform access and grouped service points.
• Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
• Ecology drains for ease of service and prevention of spilling potential environmental contaminants.
• Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.
• Quick visual inspection and minimize fluid contamination with sight gauges.
• Swing out fuel, hydraulic oil coolers and condenser for easy access cleanout.
• Ground level power service center with electrical disconnect, emergency engine shutdown, and stairway light switch.
• Optional tire pressure monitoring system provides real time information to the operator in the cab, ensuring proper inflation and optimizing tire life.
• Lighting inside the engine compartment improves visibility to service points.

Your Cat dealers know how to keep your machines productive.

BENEFITS AND FEATURES

Legendary Cat Dealer Support A valued partner, your Cat dealer is available whenever you need them.

• Preventive maintenance programs and guaranteed maintenance contracts
• Best-in-class parts availability
• Improve your efficiency with operator training
• Genuine Cat Remanufactured parts

Making your safety our priority.

BENEFITS AND FEATURES

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Machine Access

• Left and right hand stairs are angled to enhance safety for operators getting on and off the 824K.
• Continuous pass-through with handrails and non-skid surfaces with toe kicks are designed into the service areas.
• Maintain three points of contact at all times through ground level or platform accessible service areas.

Visibility

• Optional rearview camera with in-cab monitor increases operator awareness around the machine.
• Standard cab mounted LED warning strobes

Operator Environment

• Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
• Low interior sound levels
• Pressurized cab with filtered air
• Standard 76 mm (3 in) seat belts on the operator seat

Stewards of the environment.

BENEFITS AND FEATURES

Reducing the Impact to the Environment The 824K is designed and built with sustainability in mind.

• Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
• Reduce waste to the environment with our maintenance free batteries.
• Built for multiple lives, the Cat 824 is one of the most rebuilt products to achieve the second and third life to get the most value from your investment. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment.
• Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

Cat blades to match your customers dozing requirements.

BENEFITS AND FEATURES

Cat Blades Cat blades are resilient, durable and designed with excellent dozing and rolling characteristics.

• Capacities and widths are set to achieve increased productivity.
• Spreading design allows for spreading of cover material, as well as dozing of heavier loads.

Straight Blade The straight blade (5.0 m3/6.6 yd3) is designed for production dozing in stockpile material and general earthmoving.

Universal Blade The universal blade (7.7 m3/10.0 yd3) is designed to move large loads over long distances in mining applications.

Semi-Universal Blade The characteristics of the straight and universal blades are combined into the semi-universal blade (7.7 m3/10.0 yd3). It provides increased capacity with the addition of short wings which include only the dozer end bits without sacrificing spreading characteristics of straight blades.

Coal Blade The coal blade (16.2 m3/21.1 yd3) is designed for precise and productive dozing while helping to retain load control with increased capacity for lighter materials. Wing angles help retain the load while dozing.

Assemblies The blades are combined with bulldozer assemblies which consist of the push arms, hydraulic lift, tip and tilt cylinders, trunnion mounting, stabilizer and hydraulic line guards.

Extended Wear Bulldozer Arrangement The Extended Wear bulldozer arrangement is designed for moving large loads over long distances in harsh conditions. It consists of an 8.1 m3/10.7 yd3 U-blade with Abrasion Resistant Material (ARM) on the front and sides, cutting edges, push arm and integrated cylinder guards, and a heavy-duty stabilizer.

Other Available Options See your Cat dealer for other blade options.

Save time and money by working smart.

BENEFITS AND FEATURES

Data from customer machines show Cat Wheel Dozers are among the most fuel efficient machines in the industry. Several features contribute to this excellent fuel efficiency:

• ACERT Engine – Advanced engine controls maximizes power and efficiency.
• Engine Idle Shutdown – Automatic engine and electrical system shutdown conserves fuel.
• Lockup Torque Converter – Transfers more power to the ground and optimizes fuel efficiency in all applications.
• Single Clutch Speed Shifting (SCSS) – All new SCSS transmission controls provides greater momentum on grades and fuel savings by carrying that momentum through the shift points.
• Fuel Tank Capacity minimum of 12 hours operation depending on the application.

Machine configuration, operator technique, and job site layout can impact fuel consumption.

• Machine Configuration – Select the correct blade configuration based on your individual application.