CL210B LHD VEHICLE

axles standard

Front AxleFixed

Rear AxleBolster Mount

TypeBevel Gear and Pinion

TypeOutboard Planetary

dimensions approximate

Height - Ground Clearance370.0 mm

Height - Top of Covers1550.0 mm

Height - Top of ROPS: HIGH Canopy Mount1990.0 mm

Height - Top of ROPS: LOW Canopy Mount1864.0 mm

Height - Top of ROPS: MID Canopy Mount1927.0 mm

Inner Turn Radius3110.0 mm

Length - Overall with Bucket9620.0 mm

Length - Overall with Fork9650.0 mm

Length - Rear Axle to Bumper2770.0 mm

Length - Wheel Base3360.0 mm

Lift Height of Fork2490.0 mm

Lift Height - Bucket Raised3730.0 mm

Lift Height - Fork Frame3700.0 mm

Outer Turn Radius Frame5901.0 mm

Turn Radius Bucket6305.0 mm

Width2340.0 mm

Width - Overall2500.0 mm

oscillation

Degrees Up and Down from Horizon7.5 Degree

vehicle speeds

1st Gear2.9 km/h

2nd Gear6.1 km/h

3rd Gear10.5 km/h

4th Gear18.1 km/h

start system

Starter Motor TypeAir Turbine Type

articulation

Degrees of Turn Either Side43 Degree

capacities

Bucket Payload8000.0 kg

Maximum Braked Trailer MassConsult Caterpillar

Maximum Un-braked Trailer Mass10000.0 kg

RAS Belt/Cable Reeler, Maximum Payload7000.0 kg

RAS Forks, Maximum Payload10000.0 kg

RAS Slewing Jib, Maximum Payload7000.0 kg

standard ejector bucket

Heaped Capacity (SAE)3.5 m3

Struck Capacity2.7 m3

service capacities

Axle Oil (Each)60.0 L

Engine Cooling System Water72.0 L

Engine Crankcase Oil (with Filter)25.0 L

Fuel Tank200.0 L

Hydraulic Tank250.0 L

Main Air Receiver150.0 L

Transmission/Converter Oil40.0 L

Water Make Up Tank450.0 L

pneumatic system

Air Flow0.340 m3/min (1.2 ft3/min) @ 1,500 rpm

Air Receiver Volume150.0 L

Compressor TypePiston Engine Gear Driven

Governed Pressure800.0 kPa

Relief Pressure830.0 kPa

seating driver

TypeCross-seated

electrical system

PolarityFloating Chassis

TypeApproved Flameproof

Voltage12.0 volts

lights

Number/Location2 Front, 2 Rear; Approved Flameproof

alternator

DriveHydraulic

TypeApproved Flameproof

wheels

Make/Model5 Pieces (Heavy Duty)

canopy

Type Protective DeviceROPS/FOPS

grade ability

Front to Rear1:4

Side to Side (Empty)1:4

Side to Side (Loaded)1:8

tires

Inflation MediaAir

Inflation Pressure800.0 kPa

Ply RatingRadial

Size17.5 × R25

TypeXKA Tires

weight

Laden with Forks and 10T Load29000.0 kg

Unladen with Full Tanks and Bucket19000.0 kg

intake air cleaner

Intake Flame TrapSpiral Wound Type

Type/MakeDry Dual Element/Caterpillar

exhaust conditioner

AftertreatmentCatalytic Exhaust Purifier

Exhaust FilterReplaceable Element Except China

Exhaust Flame TrapReplaceable China and RSA

MakeCaterpillar

TypeFlameproof Wet

transmission

Speeds, Forward and Reverse4

TypePower Shift with Forward/Reverse

hydraulic filtration

Bucket SystemReturn 10 Micron Replaceable with Bypass

Steer/Brake SystemPressure 10 Micron Replaceable with Bypass

shutdown system

Optional ShutdownsHigh Methane; Low Hydraulic Oil; Exhaust Scrubber Temperature

Standard ShutdownsLow Engine Oil Pressure; Exhaust Temperature; Engine Coolant Level; Engine Coolant Temperature; Turbo Temperature

Standard Shutdowns (cont'd.)Scrubber Level 1; Scrubber Level 2

System TypeDCS Electronic; Intrinsically Safe Approved

engine 6 cylinder

Cooling FanHydraulic Driven Fan

Cooling SystemCoolant Based Radiator

Displacement7.2 L

Engine Make/ModelCat® C7

Maximum Power Gross171.5 kW (230 hp) @ 2,200 rpm

Maximum Torque Tested895 N·m (660 lb-ft) @ 1,700 rpm

Radiator PositionVertical Rear

TypeDiesel, Turbocharged

engine speeds

High Idle2300.0 RPM

Low Idle800.0 RPM

fuel consumption

At Full Power39.4 L/hr

Average Mine Duty20-40 L/hr (5.3-10.6 gal/hr)