569 SM STATIONARY MOUNT KNUCKLEBOOM LOADER
Caterpillar has a full line of stationary mount loaders for a wide range of mill yard applications. Four models are available with onboard or remote power. Caterpillar stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Resilient Pad Mounting system, your workday will be productive and comfortable.
SPECIFICATIONS
Gross Power74.6 kW
Knuckleboom Length9.9 m
Grapple Mounting Knuckle Length228.6 mm
BENEFITS AND FEATURES
engine
Gross Power74.6 kW
operating specifications
Knuckleboom Length9.9 m
Grapple Mounting Knuckle Length228.6 mm
Swing Bearing Diameter1371.6 mm
Swing Bearing GearingExternal
Electric Motor74.0 kW
Electric Power Supply460V: 60Hz; 575V: 60Hz
Swing Speed7.0 RPM
Operating Weight8593.3 kg
weights
Operating Weight8684.0 kg
service refill capacities
Fuel Tank473.2 L
hydraulic system
Cylinders - Live Heel152 mm X 102 mm (6 in X 4 in)
Cylinders - Main152 mm X 102 mm (6 in X 4 in)
Cylinders - Stick178 mm X 102 mm (7 in X 4 in)
Hydraulic Flow170/204/61 L/min (45/54/16 gpm)
Hydraulic Pressure - Swing17236.9 kPa
Hydraulic Pressure - System17236.9 kPa
Swing Speed7.0 RPM
dimensions
Maximum reach11.0 m
boom
Standard Boom Length9906.0 mm
Optional Boom Length10972.8 mm
BENEFITS AND FEATURES
569 SM STANDARD EQUIPMENT
- motor power supply
Electric Motor, 74 kW (100 HP) @ 1800 RPM
460 Volt (60 Hz) Electric Power Supply
Four (4) Ring High Voltage Collector Ring
Service Panel, NEMA 12 Enclosure
Pump Drive, Direct Through Flex Coupling
Across-the-line Magnetic Starting System
Turntable Power Supply Mounting - hydraulic system
Three (3) In-Line Gear Pumps
Radial Piston Swing Motor
Continuous Rotation
Pilot Joystick Controls
Two Dual Element Return (3 mic)Filtration
Filtration Bypass Indicators
Diagnostic Nipples @ Pump for serviceability - booms
9.9 m (32’6”) Knuckleboom
22.8 cm (9”) Grapple Mounting Knuckle - structural
96.5 cm x 142.2 cm (38” x 56”) Left Side Mounted Cab
Reverse Slope Windshield
Tinted Safety Glass
Lexan Skylight
Sun Visor
Adjustable Seat with Armrests
Operator Protection Guard
Pressurized Cab with Heater
Analog Gauges
Electronic Gauges
Horn
Windshield Wiper/Washer
Defroster Fan
Lighter
Dome Light
Circuit Breaker Panel
Steel Mounting
569 SM OPTIONS
- 575 volt 60 hz electric power supply
- noncontinuous limited rotation
- oil reservoir heater
- 102 m 33’6” live heel boom
- 109 m 36 knuckleboom
- 305 cm 12” grapple mounting knuckle
- single “v” heel
- double “vv” heel
- air conditioner
- concrete mounting
- 30” subframe riser mounting
MOTEUR
On standard loaders with operator’s station, the hydraulic pilot joystick controls and rocker swing pedal are ergonomically designed for ease of operation and maximum loader control required for the high cycle millyard applications. The operator station is designed with comfort in mind. The spacious cabs feature a large, fully adjustable suspension seat with lumbar support. Fold-up armrests are fully adjustable to allow adjustment of the joystick controls to match the operator for ease of operation, increased performance. Excellent visibility of the work area is provided through large tinted cab windows. Overhead visibility is maximized through the large, tinted Lexan skylight. Operator protection is afforded through the front guard. This swing-out guard is designed for quick and simple access to allow cleaning of the front window.
BENEFITS AND FEATURES
The Resilient Pad Mounting System includes a set of special rubber isolators on each mounting fastener that absorbs stress in two directions. An additional hydraulic accumulator is built into the main boom cylinder circuit to further absorb peak-load shocks.
BENEFITS AND FEATURES
Weatherproof electric service panels include starters, controls, transformers, circuit breakers and fuse blocks.
BENEFITS AND FEATURES
Electric motors range in horsepower from 75 to 100 hp and are totally enclosed and rated for severe duty. Power supply wiring packages provide for 440V/60Hz US or 575V/60Hz Canadian service.
BENEFITS AND FEATURES
Heavy-duty boom options range in length from 7.6 m to 10.9m (25’ to 36’) for handling a variety of tree lengths.