MD5150C TRACK DRILL
Maximum productivity is the advantage with the Cat MD5150C Track Drill. Fast cycle times and a low operating cost are achieved through our customer-inspired designs such as top of class power, air, fast set-ups and a reliable rock drill. Equipment life cycle is long thanks to our durable Cat components and maintenance friendly designs.
SPECIFICATIONS
Hole DiameterUp to 152 mm (6 in)
Hole Depth31 m (102.5 ft) - Maximum Depth
Air Compressor15.1 m3/min (534 cfm)


BENEFITS AND FEATURES
specifications
Hole DiameterUp to 152 mm (6 in)
Hole Depth31 m (102.5 ft) - Maximum Depth
Air Compressor15.1 m3/min (534 cfm)
Hole Depth Maximum31.0 m
Compressor15.1 m³/min
Rock Drill HPR512828.0 kW
Engine – Cat C11 Tier 3287 kW (385 hp) @ 1,800 rpm
Hole Diameter Range101.6 mm-152.4 mm (4.0 in-6.0 in)


general data
Hole Depth Maximum31.0 m
Compressor15.1 m3/min
Engine – Cat C11 Tier 3287 kW (385 hp) @ 1,800 rpm
Hole Diameter Range101.6 mm-152.4 mm (4.0 in-6.0 in)
Rock Drill HPR512828.0 kW
cab
ComponentsCB Radio (optional)
ComponentsDriller lunch box/cooler storage behind seat
ComponentsROPS/FOPS certified
ComponentsDigital engine and drill readout system
ComponentsCat 349E cab
ComponentsCoat hook
ComponentsCANbus joysticks in both armrests
ComponentsTinted sliding windows
ComponentsReversing camera
ComponentsHeater/AC pressurizer and coils mounted in cab
ComponentsFront washer and wiper
ComponentsAM/FM radio
Components110V AC outlet
ComponentsSix way adjustable seat; forward/back, up/down and reclining
ComponentsEmergency egress
ComponentsFoot pedal and handle tram controls
ComponentsAuto thread greaser at right foot
ComponentsConsole pocket for drill log, from camera screen, lunch box, drink holder and miscellaneous storage
Total Glass4.66 m2
carousel rod changer system
ComponentsHose tensioners
ComponentsManual and digital dual axis angle indicator
ComponentsTraveling and locking centralizer
ComponentsAir/grease coupling lubrication system
ComponentsLED flood light
ComponentsPatent pending breakout system
ComponentsAnti-corrosion/self lubricating coatings on pins
ComponentsDual heavy duty gripper arms
Multi-pass Depth31.1 m
Rod Diameters51 mm, 60 mm and 68 mm
Rod Length3.66 m or 4.27 m (12 ft or 14 ft)
Single Pass Depth5.63 m
Starter Rod6.1 m
air compressor
ComponentsDual filter elements
ComponentsScrew-type compressor
ComponentsDirect drive 1.25 gear ratio running at 2,250 rpm
Engine Direct Driven252 L/sec @ 9.6 bar (534 cfm @ 140 psi)
feed system
ComponentsDrill mounting slide
ComponentsReplaceable wear pads with adjusters
ComponentsAutomatic hydraulic feed chain tensioner
ComponentsPlanetary gearbox feed drive capable of 42 703 N (9,600 lb) feed force and 36.9 m/min (121 fpm) speed
ComponentsHighly visible hose reel
ComponentsHeadache rack for tram and transport
High Strength Steel Channels (2)177.8 mm
Pitch Roller Chain and Sprockets38.1 mm
power train
Altitude Before Derating2286.0 m
Ambient Temperature Capability52.0 ° C
Cat C11 Tier 3 Diesel @ 1,800 rpm287.0 kW
ComponentsSix (6) cylinder, electronically controlled, water-cooled, turbocharged and air-to-air after-cooled
ComponentsThree position engine rpm throttle 800 rpm, 1,500 rpm and 1,800 rpm
ComponentsCat dual air filter elements
Fuel Tank618 L
dimensions approximate
Height in Tram Position3.4 m
Height to Top of Cab3.2 m
Height to Top of Feed9.2 m
Length in Drilling Position8.1 m
Length in Tram Position10.8 m
Overall Width3.3 m
Width for Shipping (less dust hood)2.6 m
dimensional specifications and weights
Operating Length7.62 m
Shipping Height3.51 m
Shipping Length11.45 m
Shipping Weight (base machine)21772 kg
Shipping Width2.59 m
Tramming Length10.62 m
rock drill
HPR5128 Rock Drill – Blow Rate2500-2700 bpm
HPR5128 Rock Drill – Dual Hydraulic Variable Rotation Motors ProducingUp to 2033 N·m torque (Up to 1,500 lbf-ft torque)
HPR5128 Rock Drill – Output Energy28 kW
Optional HPR6030 Rock Drill – Blow Rate2500-2700 bpm
Optional HPR6030 Rock Drill – Dual Hydraulic Variable Rotation Motors Producing2033 N·m
Optional HPR6030 Rock Drill – Output Energy30.0 kW
Optional HPR6030 Rock Drill – Percussion PressureUp to 200 bar (Up to 2,900 psi)
Optional HPR6030 Rock Drill – Rod Diameter Choices51 mm, 60 mm or 68 mm
Optional HPR6030 Rock Drill – Weight397.0 kg
Optional HPR6832 Rock Drill – Blow Rate2500-2700 bpm
Optional HPR6832 Rock Drill – Dual Hydraulic Variable Rotation Motors Producing2033 N·m
Optional HPR6832 Rock Drill – Output Energy32 kW
Optional HPR6832 Rock Drill – Percussion PressureUp to 200 bar (Up to 2,900 psi)
Optional HPR6832 Rock Drill – Rod Diameter Choices51 mm, 60 mm or 68 mm
Optional HPR6832 Rock Drill – Weight408 kg
HPR5128 Rock Drill – Percussion PressureUp to 200 bar (Up to 2,900 psi)
HPR5128 Rock Drill – Rod Diameter Choices51 mm, 60 mm or 68 mm
HPR5128 Rock Drill – Weight408.2 kg
safety
Special FeaturesFour safety switches
Special FeaturesSlide out battery tray for easy change out
Special FeaturesTwo fixed interior LED lights and one magnetic movable LED light
Special FeaturesTwo exterior rear facing LED lights
Special FeaturesFour LED lights on front of the cab facing forward and one on top of the feed facing down to hole
Special FeaturesFive, three point access areas
Special FeaturesFlashing motion beacon and motion alarm
Special FeaturesFeed swipe rope engine shut off
Special FeaturesRearview camera mounted on rear access door
Special FeaturesHeavy duty steps and handles are strategically placed and non-slip
Special FeaturesThree points of contact at all steps
Special FeaturesFour external safety shutdowns at ground level
Special FeaturesTram interlock switch at service access area
Special FeaturesMirrors and high-resolution cameras are standard to assist in safely moving the machine
Special FeaturesFour large top opening access doors assisted with gas springs
controls in cab
ControlsSafety switch
ControlsKey switch
ControlsRemote water output flow control knob
ControlsRemote feed force control knob
ControlsTwo armrest joystick controls (both with dual axis and left with six buttons and right with seven buttons)
Dedicated SwitchesWarm oil
Dedicated SwitchesHigh idle
Dedicated SwitchesWiper (three selections)
Dedicated SwitchesSeven LED drill lights (three selections)
Dedicated SwitchesSmart drill
Dedicated SwitchesWasher
Dedicated SwitchesDrill/tram
Dedicated SwitchesDust collector
smart drill drilling system
Monitoring SystemMonitors main hydraulic system (hammer, feed, air and rotation pressure) and automatically adjusts to pre-programmed parameters
Monitoring SystemMinimizes overfeeding
Monitoring SystemAnti-plug
Monitoring SystemAnti-plunge
Monitoring SystemAnti-jam
Monitoring SystemOperator-selected, smooth, electrical control system for all drilling functions
undercarriage
ComponentsHydraulic motor-driven track assemblies with towing disconnects
ComponentsSpring applied disc brakes
ComponentsTriple rock grousers
ComponentsCat 315C
Gradeability35.0 Degrees
Ground Clearance406 mm
Ground Pressure0.91 bar
Track Gauge2032.0 mm
Track Oscillation±11°
Tram Speed (2 speed)1.61/4.02 km/h (1.0/2.5 mph)
Wide Triple Grouser Pads380.0 mm
shutdown features
CausesHigh engine water temperature
CausesHigh compressor discharge temperature
CausesLow engine oil pressure
CausesEmergency stop (4 locations)
CausesLow hydraulic oil level
instrumentation
GaugesTachometer
GaugesDrill feed pressure
GaugesWater temperature
GaugesEngine hour meter
GaugesDrill hour meter
GaugesDrill mode meter
GaugesTram mode meter
GaugesFuel consumption
GaugesCompressor temp
GaugesVoltage
GaugesDrill hammer pressure
GaugesBlow air pressure
GaugesOil pressure
GaugesDrill rotation pressure
GaugesFuel gauge
dust collecting system
Abrasive Resistant Suction Hose152.4 mm
ComponentsProgrammable pneumatic filter purge system
ComponentsReverse pulse filter cleaning system
ComponentsHydraulically operated and positional dust pickup pot
ComponentsHydraulic motor powered, dry dust collecting system
ComponentsDust collector sized to clean holes up to 152 mm (6 in) in diameter
ComponentsFeed-mounted dual axis precleaner
Filter Area16.0 m2
Top Change Filter ElementsQuantity 4
boom system
Boom Dump Below Horizontal29°
Boom Extension (inner boom extension)0.91 m
Boom Length2.7 m
Boom Lift Above Horizontal50°
Boom Swing26° L to 37° R
Extendible Offset Feed Table0.91 m
Feed Swing36° L to 37° R
cooler package
@ 2,000 rpm654.0 m3/min
ComponentsAKG four vertical sections; compressor, engine, hydraulic and air after cooler
ComponentsHydraulic fan drive with temperature compensated speed control
ComponentsSized for ambient capability of 52° C (125° F)
Fan Assembly1067.0 mm
hydraulic system
ComponentsElectric fill pump
ComponentsCooling fan with axial piston variable control pump
ComponentsDust collector gear pump
ComponentsConvenient hydraulic test ports installed
ComponentsPressure compensated axial piston pumps running at 2,340 rpm
ComponentsSight gauge with electronic safety shutdown on low level
Components416 L (110 gal)
ComponentsFull flow cooling
ComponentsFull flow 5 micron filtration
BENEFITS AND FEATURES
MD5150C STANDARD EQUIPMENT
- track undercarriage
Cat 315C lower arrangement
Hydraulic motor-driven track assemblies with towing disconnects
380 mm (15 in) wide grousers
±11° hydraulic cylinder controlled track oscillation
Hydraulic released spring applied disc brakes and triple rock grousers
Dual tramming speed 1.6/4.0 km/h (1.0/2.5 mph) - power
Cat C11 Tier 3, six (6) cylinder, electronically controlled, water-cooled, turbocharged and air-to-air after-cooled diesel engine rated at 287 kW (385 hp) at 1,800 rpm
Three speed throttle control for fuel conservation - hydraulic system
Two main 105 cc (6.4 in3) pressure compensated axial piston main pumps: – One dedicated cooling 38 cc (2.3 in3) fan pump pressure compensated axial piston piggy-back mounted off the left main pump – One dedicated dust collector 21 cc (1.3 in3) gear pump piggy-back mounted off the right main pump - compressor
Engine direct driven 252 L/sec @ 9.6 bar (534 cfm @ 140 psi) screw-type compressor - boom system
2.7 m (9 ft) extension boom with 0.91 m (3 ft) inner boom extension
The boom swing capability is 26° L to 37° R
The boom is mounted on a 0.91 m (3 ft) extendible offset feed table - feed system
Model HUFH20 hydraulic motor-driven steel channel chain feed weldment complete with the power centralizer, manual and electronic angle inclinator, unique hose sheaves and patented feed chain tensioner
Equipped with replaceable wearpads
The HUFH20 feed will change a 6.10 m (20 ft) starter drill steel inside the centralizer - rock drill
Model HPR5128 hydraulic powered percussion drill rated at 28 kW (37.5 hp) output energy with dual hydraulic variable rotation motors producing 1898 N∙m (1,400 lbf-ft) torque - cab
Cat 349E cab complete with heater, air conditioner, wiper, four (4) drilling lights and all necessary drilling controls
ROPS/FOPS certified
AM/FM stereo
Receptacle for auxiliary charger
Comfortable six way adjustable operator’s seat
Tinted, sliding windows - rod changer
Carousel for 6 × 4.2 m (14 ft) steel
Hydraulic centralizer
Unique mechanical drive and locking system for rod indexing
Patented hose tensioner
Patented wearpad adjustment
Patented anti-corrosion, self-lubricating pivot points
Changeable rod gripper inserts and rod retainers
LED light
Dual HD rod grippers - controls
The tram, drill setup, feed, rotation, rod changer and blowing air controls are mounted in the cab
Manual tram, drill setup, feed, rotation and rod changer controls are located at easy to access service positions - dust collecting system
Hydraulic motor powered, dry dust collecting system with four top service filters
Programmable pneumatic filter purge system
Dual axis patented precleaner mounting
Hydraulic operated pick up pot
152 mm (6 in) abrasive resistant suction hose - other standard features
Foot pedal coupling greaser operated from cab, collaring and Smart-drill drilling modes
Engine enclosure with four large top opening access doors assisted with gas springs, two fixed interior LED lights and one magnetic movable LED light, two exterior rear-facing LED lights
Rearview camera mounted on rear access door
Four pinning points and lifting lugs for quick easy removal of canopy
Electric hydraulic fill pump
Five, three point access areas
Flashing motion beacon and motion alarm
Four safety switches
Slideout battery tray
Cat Electronics
Auto Lube System
Toe hole and horizontal drilling capabilities
MD5150C OPTIONS
- 303 l 80 gal detergent system
- rod changer conversion kit
- hpr6030 rock drill 30 kw 402 hp
- hpr6832 rock drill 32 kw 43 hp
- cb radio
- auxiliary air connections
- rod changer for 366 m 12 ft steel
- patented drill pipe breakout wrench
MOTEUR
Fast. Strong. Dependable.
BENEFITS AND FEATURES
To improve your overall productivity, our new carousel rod changer significantly reduces rod change time. Additionally the carousel is supported by a sturdy feed and the extension boom allowing for large pattern coverage so fewer set ups are required. In fact there are seven (7) patents pending on this truly unique rod changer and feed assembly. For example our rod changer has self lubricating pivot points and is mechanical so there are no electronic switches that fail due to dirt contamination. The feed has a traveling and locking centralizer. Unlike linear alternatives, our carousel rod changer weighs less and holds more rods, allowing the boom extension to reach further and drill deeper while maintaining stability. The feed and carousel rod changer can accommodate multiple lengths and diameters of drill steel.
Sturdy Boom and Feed Support the Carousel Rod Changer
- The 2.7 m (9 ft) boom extends an additional 0.9 m (3 ft) for larger pattern coverage with fewer set ups
- The boom swing capability is 26° L to 37° R for wide pattern coverage
- Heavy-duty boom is constructed of thick square tubing with steel plate reinforcements in key areas to add strength
- Feed table is 2.7 m (9 ft) with a 0.9 m (3 ft) extension. It resists torsion and thrust loads due to high strength steel channels with diagonal internal bracing.
- A new, patented, hose tensioning method keeps hoses on the drum, sheaves are used to prolong long hose life and a feed chain auto-tensioner feature reduces adjustment time
- Feed wear pads are replaceable with patent pending adjusters
- Planetary gearbox feed drive is capable of 4354 kg (9,600 lb) feed force and 36.9 mpm (121 fpm) speed
- LED lighting on the feed illuminates the carousel and hole site for around the clock drilling
Additional Features
- Six rod carousel
- Drill steel diameters 51 mm, 60 mm and 68 mm
- Drill steel lengths 3.66 m or 4.27 m (12 or 14 ft) with a 6.1 m (20 ft) starter rod
- Deep multi-pass hole depth to 31.1 m (102 ft)
- Unique gate design always keeps a rod in position; ready to load
- Multiple functions are run simultaneously to save process time
- Heavy-duty, dual rod grippers assist with rod changes and are sized to last
- Precise positioning function indexes and locks, eliminating the need for troublesome switches and sensors that are failure prone due to the elements and vibration
- Corrosion resistant and self-lubricating pivot points eliminate manual lubrication
Reliable. Durable. Low operating cost.
BENEFITS AND FEATURES
Standard on the MD5150C is the HPR5128 hydraulic powered percussion rock drill rated at 28 kW (37.5 hp) output energy with dual hydraulic variable rotation motors producing up to 2033 N·m (1,500 lbf-ft) torque
Reliable Performer Low cost of ownership and reliability are yours with renowned Cat Rock Drills. Building on a legacy of simplistic power, these drills have long life expectancy and are field serviceable. This combination of robust design and easy maintenance means more hours of reliable, low-cost operation. For added efficiency, the pistons are matched to the cross section of the rod so the wave form is properly matched for maximum energy transfer.
Durable Design A simple design coupled with high strength materials yields exceptional durability.
- Having only half of the components of competitive models, there are fewer internal parts to wear.
- There are four major housings bolted together with high strength flanges eliminating troublesome long tie rods.
- Long life alloy bushings
- Fast response accumulators provide a smooth and efficient hydraulic oscillation
- Long leakage paths of the oscillator bearings yield high volumetric efficiency
Owner Serviceable Cat Rock Drills are so simple that owner serviceability is a viable alternative and cost savings.
- Other models require downtime for round trip transportation to a clean room environment
- Only their OEM service technicians can perform the maintenance and repairs
- All maintenance and rebuilds can be done in your shop and some maintenance can even be done with the rock drill still mounted to the feed.
- Accumulator assemblies may be replaced in the field
- Troubleshooting is easy since there are half the components of other drills
New Automated Rock Drill Lube System Peak performance is sustained when your rock drill is kept lubricated, cool, and automatically maintained with our new Auto Rock Drill Lube System. Operators no longer have to stop drilling to manually grease the rock drill every two hours.
- Saves more than forty hours a year over manual greasing
- Components reach full life expectancy at proper lube intervals
- Grease reservoir stores supply for up to five 8-10 hour shifts
- A timer board cycles the grease pump throughout the day eliminating maintenance time
- High and low pressure conditions are continually monitored through the display screen
Finish first with the most power and air in-class.
BENEFITS AND FEATURES
More Power. Big Air. The MD5150C power group delivers fast cycle times and maximum efficiency due to the combination of large air capacity, engine horsepower and an over sized cooler to keep all systems operating at optimal temperatures.
Engine MD5150C powers through hard rock with its’ Cat C11 Tier 3 engine at 287 kW (385 hp) @ 1,800 rpm. The six (6) cylinder engine is electronically controlled, turbocharged, and water-cooled. Fuel conservation, resulting in lower operating cost, is achieved with three speed engine throttle control.
Additional Engine Features
- Engine throttle range – 800 rpm, 1,500 rpm and 1,800 rpm
- Altitude before derating 2286 m (7,500 ft)
- Cat dual air filter elements
- Fuel tank 618 liter (163.3 gal)
- Top-fill oil receiver
- Starter is on right hand side
- Pumps are driven off of the cam tops
Compressor MD5150C has the high capacity air compressor, allowing for maximum flushing power.
- High pressure rating 15.1 m³/min (534 cfm) @ 9.6 bar (140 psi) gauge
- Reliable rotary screw-type compressor
- Directly driven gear ratio
- Air filters are common to the engine
Cooler Highly efficient, the new oversized design and ATAAC side by side arrangement ensures all systems are properly and efficiently cooled.
- 52° C (125° F) ambient temperature
- Proportional controlled fan
- Easy troubleshooting and cleaning of the coils
- Recirculation of hot air is limited by baffles
Loaded.
BENEFITS AND FEATURES
Keeping Operators Safe MD5150C offers a cab with superior safety features from the numerous shutdown methods and a ROPS/FOPS certified cab to responsive controls that minimize fatigue. The cab front window allows for egress, providing a second exit in case of emergency. Because, at the end of the day we all want to go home safely.
Loaded with Safety Features
- High visibility with 3.8 m2 (41.76 ft2) tinted safety glass windows
- Slim structure members minimize visual obscurity
- Skylight provides excellent visibility of the drill string and has sliding sunshade
- Mirrors and high-resolution cameras assist in moving the machine
- High resolution monitor for Smart Drill Monitoring System
- Operational lock-out lever in cab seat prevents engine start
- Tram control by lever and foot pedal
- To limit slippage, easy-grip pedals and footrest are rubber covered
- Heavy duty handles
- Large monitor with integrated rearview camera display
- Fire extinguisher mounting brackets
- Three speed window wipers
Safety Through Controls
- Dual joystick controls are ergonomic and seat-mounted
- For heightened precision, the position and shape of the CANbus joysticks match the operator’s natural expectations
- Thread lube system is operated with a foot switch
Plentiful.
BENEFITS AND FEATURES
Cab Throughout your shifts, the Cat 349E cab is a quiet and comfortable work environment for relaxed drill operation. It’s pressurized to reduce dust and it’s isolator mounted to minimize vibration.
Features
- Climate control system maintains a consistent temperature
- Air is filtered to the operator
- Windows have defrost/defog air
- Windows open for fresh air and communication with others
- Operators seat is adjustable six ways
- Armrests, controls and switches are ergonomic
- Easy access to cab air filter and fuse box
- AM/FM Radio IPOD/MP3 player ready
- Communications radio ready
- Easy to clean finishes
- Deep storage space and two cup holders
- Two auxiliary power outlets 12V
Smart Drill Monitoring System Developed to assist novice drillers, the smart drill system increases your overall drill production in difficult drilling conditions. It monitors main hydraulic systems and automatically adjusts to pre-programmed parameters. It incorporates anti-jam, anti-plunge, and anti-plug and increases overall life of drill string.
Get long-lasting reliability and performance.
BENEFITS AND FEATURES
You can expect a long life due to the structural integrity of our frames and the robust Cat 315C undercarriage. Despite the unyielding demands of drilling and navigating rough terrain, our structures are continually proven reliable. The frame supports the upper machine weight plus the added hammer pressure of percussive drilling, yet the MD5150 remains extremely maneuverable thanks to its low center of gravity, high ground clearance, and independent track oscillation.
Frame You can rely on a maintenance free and long lasting base for your drill because each frame is designed and thoroughly inspected in-house. All weld inspections are certified to CWI or CAWI standards.
- High quality steel
- Welds are magnetic particle inspected
- Vibratory stress tested
- Designed to our best-built standards
Undercarriage Get there faster on a Cat 315C Undercarriage. You can quickly and precisely position the MD5150C at drill patterns thanks to the agility of independent track oscillation. Further, the best-built design and high ground clearance allow you to confidently tram rough terrain between benches.
- Highly Maneuverable: – Dual tram speed 4.0 km/h or 1.6 km/h (2.5 mph or 1.0 mph) – Gradeability 35° – Ground clearance 406 mm (16 in) – Wide triple grousers 380 mm (15 in) – Oscillation ±11°; hydraulic cylinder controlled
- Durable: – Robust strut design is resistant to failures – Easy installation and removal of shoes – Rebuildable
- Cat Grease Lubricated Track (GLT): – Each track joint is sealed to retain the grease between the pin and bushing – Improves internal wear life by over 25% than sealed track – Track noise is reduced because there is no metal to metal contact between the pin and bushing – The grease lubricant prevents frozen or seized track joints – Overall system wear life is enhanced due to sprocket wear improvements
Contain it – quickly and quietly.
BENEFITS AND FEATURES
Powered to clean holes up to 152.4 mm (6.0 in), the MD5150C dry dust collection system is efficient, quiet and it consumes less power than traditional dust collectors. The heavy-duty system effectively manages rock fragments and dust yet is also easy to clean and service.
Features
- High capacity working pressure is 7 bar (100 psi)
- Suction rating is 0.70 m3/sec (1,480 ft3/min)
- The suction fan design limits the power requirement to correspond the application
- Easy top access to filters and air valves
- The sealed pick up pot prevents cuttings from escaping above the hole
- Vacuum generated air flow carries the materials
- Pivoting separator is feed mounted and separates cuttings from dust
- Abrasive resistant dust hose is 152.4 mm (6 in)
- Filtration area is 16 m2 (172 ft2) and separates the solid particles from the clean air
- Timed cleaning is continual through reverse-pulses of air
That makes life easier.
BENEFITS AND FEATURES
To assist you in your operations and equipment management, we provide numerous technology products that aid in utilization, tracking, planning as well as equipment maintenance and performance monitoring.
Product Link™ Reduce your owning and operating costs by maximizing your utilization. Product Link achieves this through remote fleet monitoring, asset tracking, maintenance management which are reported via satellite and cellular networks. This system allows you to monitor daily fuel usage, route fuel trucks for maximum efficiency and track equipment utilization day by day, hour by hour.
Cat Monitoring System The MD5150 is equipped with the Cat Monitoring System (Cat MS) which keeps watch over the health of your engine. It monitors critical engine system functions and will derate the engine to protect itself from damage if needed. When critical conditions arise, the Cat MS monitor displays warning lights and sound audible alarms.
Automatic Lubrication Systems Peak performance is sustained when your components are kept lubricated, cool, and automatically maintained with our new Automatic Lube Systems. A tremendous time saver for you, the MD5150C is equipped with two systems that keep the undercarriage, boom, feed, and rock drill greased at ideal intervals.
Smart Drill Monitoring System Developed to assist novice drillers, the smart drill system increases your overall drill production when drilling in difficult conditions. It monitors main hydraulic systems and automatically adjusts to pre-programmed parameters. It incorporates anti-jam, anti-plunge, and anti-plug and increases overall life of drill string.
Electrical System - Cat (ET) Electronic Technician For easy troubleshooting of the entire machine, the Cat MD5150C Track Drill includes the Cat ET System this is familiar to and favored by service technicians around the world.
Easy access. Simple. Cost effective.
BENEFITS AND FEATURES
With the maintenance friendly designs, your service access is safe and efficient. Servicing a Cat Track Drill is very straightforward thanks to well-organized electrical/hydraulic arrangements and logically located components which contribute to its valued simplicity and ease of maintenance. Systems are designed for durability and easy maintenance so your equipment life cycle is long, operating costs are lower and Cat drills maintain a high resale value.
Features
- Cat ET Software is used to troubleshoot the equipment
- Enclosure has gull-wing doors lifted with gas springs
- Interior and exterior LED lighting throughout the drill and under the canopy
- The canopy can be completely removed via four pinning points and lifting lugs
- Electric pump for filling hydraulic tank
- Grease reservoir is easily accessible for changing coupling grease
- Pumps and valves are conveniently arranged for service
- Service areas are designed with three points of contact for safe access
- Hose routings include bulkhead clamps to allow for shorter hose runs and easier replacements
Walk-in Service Station To further assist you with troubleshooting and maintenance, the MD5150C has a unique walk-in service station inside of the drill enclosure. The water tank swings out allowing covered access to major service points for the engine, compressor, air conditioning, valves for the boom and water injection systems and more. A boom-mounted camera constantly monitors the front of the drill so you have constant visibility when working inside the service center.
Supported by World-class Cat Dealer Network From helping you choose the right machine to keeping your equipment up and running, your Cat dealer provides the best in sales and service.
- Preventive maintenance programs are available to maximize your return on investment, achieve full equipment life cycle, and managing costs
- Guaranteed maintenance contracts help you forecast your businesses needs and strategically plan for service and parts expenses
- Best-in-class parts availability because Cat dealers understand the value of your uptime
- Operator training to help boost your productivity
- Genuine Cat Remanufactured parts are available
Built-in protection.
BENEFITS AND FEATURES
Loaded with numerous safety features, the Cat Track Drills are designed to provide a safe working environment for operators as well as maintenance and service technicians.
MD5150C Track Drill Safety Features
- Non-slip, heavy duty steps and handles are strategically placed
- Three points of contact at all steps
- Quick and easy access to service points
- Four external safety shutdowns at ground level
- Reversing camera
- Mirrors and high-resolution cameras to assist in safely moving the machine
- LED lighting inside and out, on the feed and in all service compartments
- Flashing motion beacon and alarm
- Slideout battery tray for easy change out
- Fire extinguisher mounting bracket
Walk-in Service Station Safety Features
- Tramming is locked out
- Covered access to major service points
Cab Safety Features
- ROPS/FOPS cab
- High visibility with 3.8 m2 (41.76 ft2) of tinted safety glass
- Slim structure members minimize visual obscurity
- Skylight allows viewing the top of the feed and has a sliding sunshade
- Mirrors and high-resolution cameras assist in safely moving the machine
- High resolution monitor for Smart Drill Monitoring System
- Operational lock-out lever in cab seat prevents engine start and operation
- Ground level shutdowns
- Tram control by lever or foot pedal
- Easy-grip pedals and footrest are rubber covered
- Heavy duty handles
- Three speed window wipers
- Fire extinguisher mounting bracket
Operator Training for Safety
- High quality materials and trainers for operation, maintenance, and service
- Classroom style training available
- Hands-on training with your local Cat dealer
For generations to come.
BENEFITS AND FEATURES
To increase efficiency and productivity for you, Cat Drill designs leverage technology and innovations that help to minimize the environmental impact of mining. We strive to provide products, services and solutions that use our natural resources wisely.
MD5150C Sustainability Features
- Fuel economy is achieved with three speed throttle control
- Product Link for optimum fleet management
- Smart Drill Monitor automatically adjusts power to the rock condition requirements
- Auto lube systems are clean and efficient
- Remanufactured components are available
- Major components can be rebuilt