CAT® C6.6 ACERT DIESEL ENGINE
Cat® C6.6 ACERT Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of common rail fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users.Industries and applications powered by C6.6 ACERT engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers and Underground Mining Equipment.C6.6 ACERT engines, with ratings: 89-129.4 bkW (119.3-173.5 bhp) @ 2200 rpm, meet U.S. EPA Tier 4 Interim, EU Stage IIIB emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.
SPECIFICATION
Minimum Power89.0 bkW
Puissance maximale129.4 bkW
Fréquence2 200 tr/min
puissance nominale
Minimum Power89.0 bkW
Puissance maximale129.4 bkW
Fréquence2 200 tr/min
normes sur les emissions
ÉmissionsNorme américaine EPA Tier 4 Interim, norme européenne Niveau IIIB
general
Engine ConfigurationDiesel 6 cylindres en ligne, cycle à 4 temps
Alésage105.0 mm (4.13 in)
Course127 mm (5.00 in)
Cylindrée6,6 l (402,8 in³)
AspirationAvec turbocompresseur et refroidisseur d'admission (TA, Turbocharged Aftercooled)
Taux de compression16.5:1
Système de combustionInjection directe
Rotation (côté volant)Sens inverse d'horloge
Cooling System Capacity13.7 L (14.5 qt)
Lube System (refill)13-16 l (13,7-16,9 US qt)
engine dimensions approximate final dimensions dependent on selected options
Longueur1063.7 mm (41.9 in)
Largeur753 mm (29.6 in)
Hauteur907 mm (35.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments)695 kg (1532 lb)
aftertreatment dimensions approximate final dimensions dependent on selected options
Longueur852.7 mm (33.6 in)
Largeur364.6 mm (14.35 in)
Hauteur352 mm (13.9 in)
Poids40 kg (88.1 lb)
Diamètre283 mm (11.1 in)
C6.6 ACERT™ EQUIPEMENT STANDARD
- air inlet system
Standard air cleaners - systeme de commande
Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines - circuit de refroidissement
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix - flywheels and flywheel housing
Wide choice of drivetrain interfaces, including SAE No. 1, SAE No. 2, and SAE No. 3 configurations - circuit de carburant
Electronic high pressure common rail
ACERT Technology
Innovative filter design to ensure maximum protection of the engine - systeme de lubrification
Wide choice of sumps for different applications - power take off pto
SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available. - us epa tier 4 interim eu stage iiib aftertreatment clean emissions control equipment
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
3" flex pipe connection kit with straight, 45°, and 90° options for flexibility